Add a vCenter App Template

The App template defines the settings and configurations of the VM to be deployed in the sandbox as well as the application(s) to be installed on that VM.

To add a new vCenter App template:

  1. Click + Add.

    The Create New App wizard is displayed.

  2. From the Select Deployment Type pane, select the desired vCenter deployment type.

  3. Enter a Name for the App template.

    Note: The App template's name has a limit of 100 characters and can only contain alpha-numeric characters, spaces, and the following characters: | . - _ ] [

  4. Click Create.

    The App template is created and the App wizard's General page is displayed.

  5. In the General page, define the App template's display settings and category.
    Field Required Description
    Name Required App name that is displayed in the catalog.
    Description Optional Description of the App.
    Icon Optional Add an image to the catalog definition. The recommended size for the image is 190x120 pixels (image size is limited to 400x400 pixels or 200 KB).
    Categories Optional

    Service categories are a method to classify Apps. The Apps are displayed in the Add App / Service side pane in the blueprint and sandbox diagram, arranged in categories. Only users who are permitted to view the category can access the App. Apps without a category are not displayed.

    By default, the Applications category is selected.

    Select a category from the dropdown list. You can select additional categories. Examples of categories are: applications, networking and VLAN.

    Notes:
    • The category must be associated with the domain in which the required cloud provider resides. For information about domain categories, see Managing domain categories.
    • It is recommended to use up to a 2-level hierarchy when organizing the Add App / Service catalog (i.e. root and sub-category).
    • In the Add App / Service side pane, Apps are displayed in the root category only. This includes services associated to sub-categories.
  6. In the left pane, click Deployment Paths and configure the App template's deployment path.

    A deployment path consists of (1) the selected deployment type (the method to be used to deploy the VM), (2) the VM’s settings such as storage size, CPU and image file, and (3) the CloudShell cloud provider resource that enables CloudShell to access the cloud provider and deploy the VM on it.

    Note the deployment path's name (highlighted in the image below). The path's name is dynamic and consists of the selected Cloud Provider resource and Deployment type. You can change the name of the path by clicking the field.

    1. From the Deployment drop down list, select the deployment type.

      The selected deployment type's attributes are displayed.

      Deployment types related to the vCenter 2nd Gen cloud provider shell include "2G" in the title (for example: "vCenter VM From Template 2G").

    2. Fill in the details.

      • For vCenter Clone VM From VM attributes
        Attribute vCenter shell version Description
        Cloud Provider All Name of the vCenter cloud provider resource to be used
        vCenter VM All Full path to the VM that will be used to clone a new VM, relative to the datacenter. For example: My-Folder/My-VM

        Behavior During Save (optional)

        		 All

        (Applies to the Save and Restore paid add-on) The VM's state while the sandbox is being saved. Options are Remain Powered On and Power Off.

        • Remain Powered On: The VM will remain powered on during the saving state.

        • Power Off: If the VM was powered on before the sandbox entered the saving state, the VM will shut down (power off) for the duration of the save.

        Notes:
        • The value configured here overrides the configuration in the vCenter cloud provider resource, see Add VMware vCenter Cloud Provider Resource.

        • After save has ended, the VM returns to its state prior to saving, regardless of the behavior during the save.
        Saved Sandbox Storage All

        (Applies to the Save and Restore paid add-on) During the saving process, CloudShell creates a clone of the sandbox's App VMs in this vCenter storage, which CloudShell will later use to restore the VM when the user restores the saved sandbox. See Save a Sandbox for more information.

        For storage purposes, these VM clones can be stored in a different data storage than the one configured in the VM Storage attribute defined on the vCenter cloud provider resource. The storage can be either a datastore or a datastore cluster. For example: datastore1 or clustername/datastore1.

        Customization Spec 2nd Gen only

        Name of the vSphere VM Customization Specification to apply to the App's VM.
        Hostname 2nd Gen only

        (Only applies to Windows and Linux VMs) The hostname to set on the VM.

        Notes: If Customization Spec is specified, the value specified in the Hostname attribute will be used. If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a password in the App resource page.

        Private IP 2nd Gen only

        (Only applies to Windows and Linux VMs) The private static IP to set on the first vNIC of the VM. If there's a default gateway, specify it after the private IP. For example: "192.168.4.124:80.114.1.87" where 80.114.1.87 is the default gateway

        Notes:
        • If there is no gateway, the .1 IP of the same subnet will be used as the gateway. So, for private IP "192.168.4.124", gateway "192.168.4.1" will be used.
        • It is also possible to provide a subnet mask here. For example: "192.168.4.124/24:80.114.1.87"
        • If Customization Spec is specified, the value specified in the Private IP attribute will be used.
        • If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a Password in the App resource page.
        • If Customization Spec is specified, the value specified in the Private IP attribute will be used. If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a Password in the App resource page.
        CPU 2nd Gen only Number of CPU core s to configure on the VM.
        RAM 2nd Gen only Amount of RAM (GB) to configure on the VM.
        HDD 2nd Gen only Allows to add/edit hard disk size to the VM. The syntax is semi-colon separated disk pairs 'Hard Disk Label: Disk Size (GB)'. For example: 'Hard Disk 1:100;Hard Disk 2:200'. Short-hand format is also valid: '1:100;2:200'.
      • For VCenter Deploy VM From Linked Clone attributes
        Attribute vCenter shell version Description
        Cloud Provider All Name of the vCenter cloud provider resource to be used
        vCenter VM All Full path to the VM containing the snapshot that will be used to clone a new VM, relative to the datacenter.
        vCenter VM Snapshot All

        Full path to the virtual machine snapshot that will be used to clone a new VM. For example Snapshot1/Snapshot2

        This snapshot should be associated with the VM defined in the vCenter VM input.
        Behavior During Save All

        (Applies to the Save and Restore paid add-on) The VM's state while the sandbox is being saved. Options are Remain Powered On and Power Off.

        • Remain Powered On: The VM will remain powered on during the saving state.

        • Power Off: If the VM was powered on before the sandbox entered the saving state, the VM will shut down (power off) for the duration of the save.

        Notes:
        • The value configured here overrides the configuration in the vCenter cloud provider resource, see Add VMware vCenter Cloud Provider Resource.

        • After save has ended, the VM returns to its state prior to saving, regardless of the behavior during the save.
        Saved Sandbox Storage All

        (Applies to the Save and Restore paid add-on) During the saving process, CloudShell creates a clone of the sandbox's App VMs in this vCenter storage, which CloudShell will later use to restore the VM when the user restores the saved sandbox. See Save a Sandbox for more information.

        For storage purposes, these VM clones can be stored in a different data storage than the one configured in the VM Storage attribute defined on the vCenter cloud provider resource. The storage can be either a datastore or a datastore cluster. For example: datastore1 or clustername/datastore1.

        Note: The value configured here overrides the configuration in the vCenter cloud provider resource, see Add VMware vCenter Cloud Provider Resource.
        Customization Spec 2nd Gen only

        Name of the vSphere VM Customization Specification to apply to the App's VM.
        Hostname 2nd Gen only

        (Only applies to Windows and Linux VMs) The hostname to set on the VM.

        Notes: If Customization Spec is specified, the value specified in the Hostname attribute will be used. If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a password in the App resource page
        Private IP 2nd Gen only

        (Only applies to Windows and Linux VMs) The private static IP to set on the first vNIC of the VM. If there's a default gateway, specify it after the private IP. For example: "192.168.4.124:80.114.1.87" where 80.114.1.87 is the default gateway

        Notes:
        • If there is no gateway, the .1 IP of the same subnet will be used as the gateway. So, for private IP "192.168.4.124", gateway "192.168.4.1" will be used.
        • It is also possible to provide a subnet mask here. For example: "192.168.4.124/24:80.114.1.87"
        • If Customization Spec is specified, the value specified in the Private IP attribute will be used.
        • If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a Password in the App resource page.
        • If Customization Spec is specified, the value specified in the Private IP attribute will be used. If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a Password in the App resource page.
        CPU 2nd Gen only Number of CPU core s to configure on the VM.
        RAM 2nd Gen only Amount of RAM (GB) to configure on the VM.
        HDD 2nd Gen only Allows to add/edit hard disk size to the VM. The syntax is semi-colon separated disk pairs 'Hard Disk Label: Disk Size (GB)'. For example: 'Hard Disk 1:100;Hard Disk 2:200'. Short-hand format is also valid: '1:100;2:200'.
      • For vCenter VM From Image attributes
        Attribute vCenter shell version Description
        Cloud Provider All

        Name of the vCenter cloud provider resource to be used
        vCenter Image All

        Full path to the vCenter OVF image file, relative to the datacenter. For example: My-OVF-Images/Image.ovf

        Note: Path must be accessible to all execution servers. OVF tool must be installed on all execution servers.
        vCenter Name All Name of the vCenter resource to be used
        vCenter Image Arguments All

        (Optional) vCenter-specific arguments to use when deploying the virtual machine.

        Example for OVF:

        --allowExtraConfig --prop:Hostname=ASAvtest --prop:HARole=Standalone --prop:SSHEnable=True --prop:DHCP=True --net:Management0-0='Office LAN 41' --net:GigabitEthernet0-0='VLAN_access_101'

        Behavior During Save All

        (Applies to the Save and Restore paid add-on) The VM's state while the sandbox is being saved. Options are Remain Powered On and Power Off.

        • Remain Powered On: The VM will remain powered on during the saving state.

        • Power Off: If the VM was powered on before the sandbox entered the saving state, the VM will shut down (power off) for the duration of the save.

        Notes:
        • The value configured here overrides the configuration in the vCenter cloud provider resource, see Add VMware vCenter Cloud Provider Resource.

        • After save has ended, the VM returns to its state prior to saving, regardless of the behavior during the save.
        Saved Sandbox Storage All

        (Applies to the Save and Restore paid add-on) During the saving process, CloudShell creates a clone of the sandbox's App VMs in this vCenter storage, which CloudShell will later use to restore the VM when the user restores the saved sandbox. See Save a Sandbox for more information.

        For storage purposes, these VM clones can be stored in a different data storage than the one configured in the VM Storage attribute defined on the vCenter cloud provider resource. The storage can be either a datastore or a datastore cluster. For example: datastore1 or clustername/datastore1.

        Note: The value configured here overrides the configuration in the vCenter cloud provider resource, see Add VMware vCenter Cloud Provider Resource.
        Customization Spec 2nd Gen only

        Name of the vSphere VM Customization Specification to apply to the App's VM.
        Hostname 2nd Gen only

        (Only applies to Windows and Linux VMs) The hostname to set on the VM.

        Notes: If Customization Spec is specified, the value specified in the Hostname attribute will be used. If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a password in the App resource page
        Private IP 2nd Gen only

        (Only applies to Windows and Linux VMs) The private static IP to set on the first vNIC of the VM. If there's a default gateway, specify it after the private IP. For example: "192.168.4.124:80.114.1.87" where 80.114.1.87 is the default gateway

        Notes:
        • If there is no gateway, the .1 IP of the same subnet will be used as the gateway. So, for private IP "192.168.4.124", gateway "192.168.4.1" will be used.
        • It is also possible to provide a subnet mask here. For example: "192.168.4.124/24:80.114.1.87"
        • If Customization Spec is specified, the value specified in the Private IP attribute will be used.
        • If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a Password in the App resource page.
        • If Customization Spec is specified, the value specified in the Private IP attribute will be used. If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a Password in the App resource page.
        CPU 2nd Gen only Number of CPU core s to configure on the VM.
        RAM 2nd Gen only Amount of RAM (GB) to configure on the VM.
        HDD 2nd Gen only Allows to add/edit hard disk size to the VM. The syntax is semi-colon separated disk pairs 'Hard Disk Label: Disk Size (GB)'. For example: 'Hard Disk 1:100;Hard Disk 2:200'. Short-hand format is also valid: '1:100;2:200'.
      • For vCenter VM From Template attributes
        Attribute vCenter shell version Description
        Cloud Provider All Name of the vCenter cloud provider resource to be used
        vCenter Template All Path to the vCenter template to use in the virtual machine's creation. Path is relative to the datacenter and must include the template name, for example: My-Templates/Template1
        Behavior During Save All

        (Applies to the Save and Restore paid add-on) The VM's state while the sandbox is being saved. Options are Remain Powered On and Power Off.

        • Remain Powered On: The VM will remain powered on during the saving state.

        • Power Off: If the VM was powered on before the sandbox entered the saving state, the VM will shut down (power off) for the duration of the save.

        Notes:
        • The value configured here overrides the configuration in the vCenter cloud provider resource, see Add VMware vCenter Cloud Provider Resource.

        • After save has ended, the VM returns to its state prior to saving, regardless of the behavior during the save.
        Saved Sandbox Storage All

        (Applies to the Save and Restore paid add-on) During the saving process, CloudShell creates a clone of the sandbox's App VMs in this vCenter storage, which CloudShell will later use to restore the VM when the user restores the saved sandbox. See Save a Sandbox for more information.

        For storage purposes, these VM clones can be stored in a different data storage than the one configured in the VM Storage attribute defined on the vCenter cloud provider resource. The storage can be either a datastore or a datastore cluster. For example: datastore1 or clustername/datastore1.

        Note: Setting a value in the App template’s attribute will override the value in the Saved Sandbox Storageattribute on the vCenter resource. See Add VMware vCenter Cloud Provider Resource.
        Customization Spec 2nd Gen only

        Name of the vSphere VM Customization Specification to apply to the App's VM.
        Hostname 2nd Gen only

        (Only applies to Windows and Linux VMs) The hostname to set on the VM.

        Notes: If Customization Spec is specified, the value specified in the Hostname attribute will be used. If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a password in the App resource page
        Private IP 2nd Gen only

        (Only applies to Windows and Linux VMs) The private static IP to set on the first vNIC of the VM. If there's a default gateway, specify it after the private IP. For example: "192.168.4.124:80.114.1.87" where 80.114.1.87 is the default gateway

        Notes:
        • If there is no gateway, the .1 IP of the same subnet will be used as the gateway. So, for private IP "192.168.4.124", gateway "192.168.4.1" will be used.
        • It is also possible to provide a subnet mask here. For example: "192.168.4.124/24:80.114.1.87"
        • If Customization Spec is specified, the value specified in the Private IP attribute will be used.
        • If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a Password in the App resource page.
        • If Customization Spec is specified, the value specified in the Private IP attribute will be used. If Customization Spec is not specified, a new one will be created for the VM. For Windows VMs, make sure to specify a Password in the App resource page.
        CPU 2nd Gen only Number of CPU core s to configure on the VM.
        RAM 2nd Gen only Amount of RAM (GB) to configure on the VM.
        HDD 2nd Gen only Allows to add/edit hard disk size to the VM. The syntax is semi-colon separated disk pairs 'Hard Disk Label: Disk Size (GB)'. For example: 'Hard Disk 1:100;Hard Disk 2:200'. Short-hand format is also valid: '1:100;2:200'.
     
  7. To add additional deployment paths to the App template, click the Add New Deployment Path link at the bottom of the wizard and fill in the required information.
  8. In the left pane, click Configuration Management and configure the application to be installed on the VM.

    Tip: To learn how to develop custom scripts and Ansible playbooks, including examples, and set up support for the desired configuration management tool, see Developing Configuration Management Scripts for Apps.

    Notes:
    • To run configuration management on an Azure App, make sure the App's VM size is Basic_A2 or larger.

    • For configuration management operations, CloudShell uses an available Execution Server (for Ansible, it's a Linux Execution Server that has the Supports Ansible flag).

      If the cloud provider resource has an Execution Server Selector configured, it will use that selector. If the selector is empty, CloudShell will use the selector defined in the appropriate Resource Manager Client >Configuration Services model (Ansible Configuration or Custom Script Configuration).

    • Execution Server selectors specified on the deployed App shell/resource are not used to execute configuration management operations.

    1. Define the script or playbook to install.

      Attribute Description
      Select Tool

      Select the application's installation and configuration tool.

      • None: Do not use any Configuration Management option. Use this option if, for example, the image or template already contains the application to install.
      • Script: Select the custom script to run (PowerShell, bash or sh).

      • Ansible: (Intended for customers who are already using Ansible) Select the Ansible playbook to run.

        Note: The playbook runs once during the Setup phase for all of the sandbox's Apps that use that playbook, after CloudShell has finished deploying their VMs. This is done both to improve performance and support cross-server logic where multiple applications need to be installed and configured in a certain way.

        Note that the playbook runs once for all of the sandbox's Apps that use that playbook, after CloudShell has finished deploying their VMs.

      Depending on the selection, additional options may become available.

      Connection Method

      The method to use to connect to the VM.

      Select:
      Playbook / Script Location

      Details of the Ansible playbook or custom script.

      • URL: Raw URL of the Ansible playbook or ZIP file, or custom script on the online repository (GitHub, GitLab and BitBucket are supported). URL must be accessible to the Execution Servers.

        Tip: The URL can accept parameters defined on the App, enabling you to test new versions of scripts without affecting consumer-ready versions. For example, you can have an App everyone is using, but if you want to test a version you're developing, simply change the value of the URL parameter in the test blueprint.
        • To use parameters, specify the parameter name in curly brackets (for example: {branch}).
        • If the App has this parameter, CloudShell will replace the {branch} with its value during execution.
        • If the parameter is missing, CloudShell will replace {branch} with emptystring.
        • If you are using a global input, customers would be well advised to set a default value on the global input
        https://raw.githubusercontent.com/.../site.yml
        https://gitlab.com/api/v4/projects/{Project ID}/repository/files/testsharding%2Eyml/raw?ref=master

        Where:

        • Each special character that the file contains has to be encoded. In the example above - “%2E” is an encoded point (“.”)

        • The ref value is the branch name (master for this example)

        http://{datacenter server IP}/rest/api/1.0/projects/{projectKey}/repos/{repository name}/raw/testsharding.yml

        • For source code files, specify the API endpoint: 

          https://api.bitbucket.org/2.0/repositories/{username}/{repository name}/src/{GUID- the Commit hash string} /testsharding.yml

        • For download files (files residing in the repository's "Downloads" folder), specify this endpoint: 

          https://api.bitbucket.org/2.0/repositories/{username}/{repository name}/downloads/site.yml

        Important: If the URL is private (HTTPS), the VM will need to have a valid SSL certificate. To disable the certificate check, open Resource Manager Client>Resource Families>Configuration Services (Ansible Configuration or Custom Script Configuration) and set the Verify Certificate attribute to False.

      • User/Password: (For private repositories) Access credentials or token to the script/playbook's online repository.

      • Token: (For private repositories) Access token to the script/playbook's online repository.

        For GitHub and GitLab, specify the API token. For BitBucket Cloud, set the repo's "App Password" in the App template's Password field. For BitBucket Data Center, specify the personal access token.

      Notes:
      • For Custom Script configurations: In SSH mode, only bash and sh scripts are allowed. In WinRM mode, only PowerShell scripts are allowed. WinRM over HTTPS only applies to custom scripts at this time. If WinRM is configured to run over HTTPS, the execution server will first try to run the custom script over HTTPS and then fall back to HTTP if HTTPS is unsuccessful. To prevent the fallback, set the winrm_transport parameter to ssl.
      • For Ansible configurations: The Ansible playbook must be a YML or YAML file. To specify multiple playbooks or a hierarchy of an Ansible project, you can specify multiple Ansible playbooks or a ZIP package. For example: https://raw.githubusercontent.com/QualiSystemsLab/private-repo-zip-download/master/README.zip
      • If a ZIP containing 2 or more playbooks is specified, CloudShell will use the playbook file titled site.yml or site.yaml. If the file is missing, the App's deployment will fail.
      Inventory Groups

      (For Ansible) Specify the host groups for the application to be installed, separated by semicolons (;). The newly deployed VM will be associated to these groups, thus allowing plays that target these groups to run on the VM.

      For example: Servers/AppServers;Servers/DBServers
      Parameters

      Parameters to be passed to the Ansible playbook or custom script. Specify the parameters and their default values.

      In the blueprint or sandbox diagram, privileged users can also set the parameter to receive the value that is specified for a global input when reserving a sandbox containing the App. This is done by selecting the global input when editing the App in the blueprint or sandbox diagram. For example, a global input that specifies the build number of a product to be tested or which components of a product to install.

      (For Ansible) To customize the port to be used to communicate with the VM, add the Ansible_port parameter. Default: SSH / Port: 22 / WinRM: 5985.
      Additional Arguments

      (For Ansible) Define arguments to be passed to the execution of the playbook (Ansible-playbook command). For example, -v will set verbose mode on while -f will set the maximum number of VMs to be handled in parallel. Multiple arguments can be given, separated by spaces. For additional information on possible arguments, see the official Ansible documentation.

      The arguments must be specified in Resource Manager Client > Configuration Services family > Ansible Configuration model > Ansible Additional Arguments attribute.

      Note: The arguments are defined globally for all Apps using Ansible.

      Important: To configure Ansible to connect to certified hosts only (Linux VMs with a valid 'known_hosts' key), include the following additional arguments: --ssh-extra-args='-o StrictHostKeyChecking=yes'

    2. To enable the end-user to rerun the App's configuration management on the deployed App in the sandbox, select Allow rerunning configuration management for resources deployed from the App. Once the App's deployment completes, a Rerun Configuration Management command is included in the deployed App's Application Commands pane. For details, see Run App Commands. This is useful for rolling back the App's VM to its original state.

    3. To enable blueprint and sandbox owners to modify the App's Configuration Management details, select Allow blueprint/sandbox owners to modify the App's Configuration Management. The following details can be modified: playbook/script, authentication details, inventory groups, and parameters. Note that the modifications only apply to the blueprint or sandbox of the instance.
    4. Optionally click the Add New Script/Playbook link at the bottom right to add additional custom scripts/Ansible playbooks to the App. The scripts will run in their display order, from top to bottom. You can drag scripts up or down to rearrange.

    1. To change the script's alias, click the script's name and change as appropriate.

  9. In the left pane, click App Resource to optionally set the VM's operating system user credentials (for example, to connect to the VM via RDP or SSH). You can also change the deployed App's Shell.

    To help sandbox end-users connect to the VM, it is recommended to include the User and Password in the blueprint's instructions. For additional information, see Add Instructions.

    Attribute Description
    Shell

    The Shell on which the App's VMs are based. When an App is deployed in a sandbox, it changes into a "deployed App resource", which is based on the selected Shell. By default, the "Generic App Model" Shell is used.

    Deployed Apps include a default set of commands such as Power On and Refresh IP, and the VM's User and Password attributes, as explained below.

    Note: Changing the Shell might cause additional fields to become visible and you may need to enter further information.
    User

    User defined in the App's image. The User/Password credentials are used by QualiX to create in-browser connections to the VM from within the sandbox.

    Notes:
    • For AWS instances,make sure to set the User of a user that already exists on the Amazon machine image. For custom images, the image owner should know the credentials, while community/marketplace images have the image's credentials listed in their documentation.
    • Azure VM username and password restrictions apply. For details, see Frequently asked question about Windows Virtual Machines.
    • For Azure Marketplace images, CloudShell will create a user on the VM based on the User/Password credentials you specify.
    • For Azure Marketplace VMs, if the user is not set, CloudShell will set adminuser as the default user name.
    Password

    VM user's password.

    Notes:
    • For AWS Marketplace images, leave the Password empty. The AWS shell generates a new key-pair for each sandbox, which QualiX will use to establish the in-browser connection.
    • For Azure Marketplace images:
      • If the password is not set, only the user name will be required. For Linux VMs, CloudShell will create an SSH key-pair to enable a secure connection.
      • If the password is set, it will be displayed as asterisks (******) in the blueprint or sandbox.

  10. Click Done.

    The new App template is displayed in the Apps page.